Fire Prevention Capability Index | Wanlin Fire

Industry framework briefing · Updated

Facility Status You Can Prove: Dynamic Indicators for community service operators

In one sentence: Governments need area risk pictures, insurers need defensible assessments, owners need proof that investment works - the shared data layer that lets buildings, platforms and assessors speak one language about fire safety.

At a glance

Output
A 0-100 composite score per building, published in five grades from excellent to fail
Two tracks
Static indicators from records (re-verified on a 90-day cycle) and dynamic indicators from IoT sensing (about 5-minute refresh) plus composite items cross-checking both
Coverage
Four building categories: residential, public buildings, factories and warehouses
Benchmark
GB/T 41020-2021 (fire risk assessment guideline for building property insurance); a major fire-hazard condition triggers a rule-based downgrade regardless of other scores

From qualitative lists to one computable score

A single source of truth is fragile; the model pairs paper records with live sensing so one of them can catch the other lying.

The model’s declared principles: scientific, quantifiable, automatable, and compatible with current fire regulations. It is not a paper checklist but a computation specification meant to be embedded in platforms.

Static, dynamic, composite

Composite items (S+D)

Items scored only where records and sensors agree: a maintenance ledger that says "system OK" must survive the pressure gauge saying otherwise before the points are granted.

Static indicators (S)

Foundations that change slowly: profiles, archives, staffing qualifications, drawings, periodic inspection records. Entered and re-verified by people on a 90-day cycle.

Dynamic indicators (D)

Live facility state from IoT sensing: alarm systems, hydrant pressure, electrical monitoring, access and video - auto-collected, refreshed about every five minutes, alarms in real time.

The index outputs 0-100; a building touching a major fire-hazard condition is downgraded by rule, whatever its other dimensions score.

Three indicator families

Indicator families at a glance
FamilySizeCovers
Fire safety management5 dutiesPolicy and archives, emergency and evacuation plans with drills, training and assessment, daily and periodic inspection, on-site response capability
Building fire prevention13 itemsExternal environment, fire lanes, separation distances, fire resistance, height and storey type, building age, compartments, egress, layout, occupant density, linings, insulation, electrical equipment
Fire protection systems7 systemsOutdoor and indoor hydrants, automatic alarm, automatic sprinklers, smoke control, extinguishers and other means, maintenance regime

Every third-tier indicator fixes six elements in the library: name, type (S / D / S+D), weight, deduction rule, data source and judgement basis.

Grades and the one-vote downgrade

Excellent

Managed capability is demonstrably strong across all three families; sustained by keeping records current and sensors healthy.

Good

Solid overall with defined improvement items; typical of well-run buildings early in their monitoring program.

Pass

Meets baseline expectations; gaps are known and tracked rather than surprising.

Warning

Defined weaknesses need targeted fixes; graded alerts route them to the responsible party with deadlines.

Fail

Fails the baseline; remediation is mandatory and re-scoring follows the fix, not the paperwork.

The data chain behind the score

  1. Score by rule. Each indicator is scored by its published rule - deduction logic, data source, judgement basis fixed in the library.
  2. Compose the index. Family scores compose into the 0-100 index; major-hazard conditions trigger the one-vote downgrade.
  3. Publish and alert. Dashboards show the grade; alerts are pushed by severity to the accountable parties.
  4. Sense and record. Sensing terminals and business systems produce raw events and ledger entries.
  5. Clean and normalize. A data platform cleans and normalizes multi-source inputs into shared fields.

What feeds the dynamic half

Dynamic indicators are only honest if the sensors are real. The mappings below show the facility statuses that D-type indicators consume and the published Wanlin device families that produce them.

Dynamic indicators to device families
Facility status (D inputs)Device familyWhy it matters
Electrical load and faultsSmart electricity host 705 with breakers 710 / 711Load ratio and electrical detection results as live data
Detection coverage and faultsSmoke WANLIN-307/309/310, heat WANLIN-340, gas 365Every point reports online status, signal and battery
Access, doors and environmentNB-IoT door contacts WANLIN-241 and camerasEgress doors, lanes and machine-room conditions under watch
Hydrant mains pressure and tank level4G pressure gauges (WANLIN-770) and level gauges (WANLIN-780)Answers "is there water" before the fire, not after
Alarm panel health and networkingWANLIN-921 transmission (GB 26875.3)Online status and linkage of an existing panel, supervised continuously

Frequently asked questions

What data flows into it?

Inspection and assessment data, IoT sensing data and business-ledger data are cleaned, normalized, scored by rule, composed into the index and pushed to dashboards with graded alerts.

Does a good grade mean no risk?

No. The index measures managed capability at a point in time and complements, never replaces, statutory inspection and assessment obligations.

How is the score built?

Static indicators come from records re-verified on a 90-day cycle; dynamic indicators come from IoT sensing with about 5-minute refresh; composite items require records and sensors to agree before points are granted.

Which buildings does it cover?

Four social-unit categories: residential buildings, public buildings, factories and warehouses.

Why cross-check static and dynamic data?

A ledger can say "system OK" while the pressure gauge says otherwise. Composite items exist so single-source errors cannot silently pass into the score.

Next step

Start with the dynamic half: pressure, level, electricity and alarm health are the cheapest continuous truths a building can produce, and they anchor every composite check.

Scope disclosure: this page explains a published industry data framework in plain terms for fire-safety practitioners; it is educational and does not assert any participation status, designation or certification for Wanlin products. Program participation, assessments and certificate scope must be confirmed through the organizing bodies and, for devices, against the exact model and configuration. To discuss how your building data could meet the framework, contact wanlinfirecontrol@163.com or 4006-016-119 / +86 132 6167 7119.

Evidence and references to request

What data flows into it?

Inspection and assessment data, IoT sensing data and business-ledger data are cleaned, normalized, scored by rule, composed into the index and pushed to dashboards with graded alerts.

Does a good grade mean no risk?

No. The index measures managed capability at a point in time and complements, never replaces, statutory inspection and assessment obligations.

How is the score built?

Static indicators come from records re-verified on a 90-day cycle; dynamic indicators come from IoT sensing with about 5-minute refresh; composite items require records and sensors to agree before points are granted.

Also on this site: Fire Safety Data Production Framework · SDOS / SPP Data Asset Management · Fire Industry Internet Demonstration Site, the aging-community renovation program, the product center for datasheets, and the site FAQ section., and the topic guides index